NUTRE CLEAN XP is the latest chemical technology to come out of NuPro Technologies, Inc. This Green Chemistry Challenge award winning chemistry clearly demonstrates our efforts to continually pioneer alternate solvent technology for the processing of photopolymer flexographic printing plates.
Nutre Clean XP is designed to develop photopolymer plates distributed throughout the world, and performs excellently in both rotary and in-line systems. Nutre Clean XP places minimal impact on the environment and helps create a healthy work setting, as it is the flexographic industry's only green washout solvent. In addition to its environmental and health benefits, Nutre Clean XP consistently yields unparalleled results, in terms of plate processing and printing quality.

We offer money back guarantee: IF YOU ARE NOT SATISFIED WITH YOUR CONVERSION, WE WILL REFUND YOUR MONEY.
NuPro Technologies is proud to introduce the next generation in chemical technology for the development of photopolymer plates. Nutre Clean XP is the safest, photopolymer plate developer on the market. NuPro's Presidential Green Chemistry Challenge award winning solvent gives you the highest quality in developing plates, but without any Hazardous Air Pollutants (HAPs), or SARA 313 reportables. NuPro Technologies, with its Nutre Clean XP has improved worker's safety and air quality to an advanced state.

NuPro Technologies has also established the highest quality recycling program for its customers. In addition to being specifically formulated to be recycled with NuPro's one of a kind Cold Reclamation System (CRS), Nutre Clean XP consistently yields high distillation rates. Due to the fact that all components within Nutre Clean XP share matching boiling points, no add backs or make up is required for the recovered chemistry. NuPro's quality assurance program is only available through its certified distributors.

WORKER SAFETY

Nutre Clean XP's high flash point (167°F/75°C) coupled with the fact that all major components are permitted by the FDA and are GRAS (Generally Recognized As Safe) by FEMA, improves worker safety and can reduce insurance underwriting cost by eliminating flammables from the workplace. At operating temperature, the very low vapor pressure and evaporative rates insure that only minimal amounts of Nutre Clean XP become airborne in the workplace.

Due to Nutre Clean XP's ability to solubilize photopolymer, the processor will remain clean for an extended period of time reducing the frequency of preventative maintenance, operator involvement, and lost production time.

ENVIRONMENTAL SAFETY

Nutre Clean XP is both workplace and environmentally friendly and is a plate developing solvent that contains no Hazardous Air Pollutants (HAPs) or SARA 313 reportables. Furthermore, because it is based on highly substituted, aromatic, low volatility solvents, which are derived from the flavor and fragrance industry, Nutre Clean XP is a safe alternative for the flexographic plate maker.

Nutre Clean XP solvent is not only non-hazardous and non-toxic, but also produces non-hazardous and non-toxic waste.

Nutre Clean XP is designed to develop photopolymer plates distributed throughout the world, with performance rivaling that of perchloroethylene. It is a proprietary blend of highly substituted, aromatic, low volatility solvents that are derived from the flavor and fragrance industry. High solvency (good strength and subsequent cleaning ability) plus the ability to soil load at extremely high levels, cause far less plate washout to be used each month; all of which ultimately result in a very cost effective solvent.

USE

Nutre Clean XP is designed for use in rotary and in-line plate processing equipment. In all cases the solvent heaters, required with previous chemistries, should be disengaged. The fact that Nutre Clean XP requires no heat causes less solvent to become airborne and therefore improves the air quality within the work setting. Nutre Clean XP solubilizes photopolymers and for this reason it is recommended that when converting from other washout solvents, ALL of the previous chemistry, with the exception of Nutre Clean FPX, should be drained and the processor thoroughly cleaned. After cleaning, the processor should be run with Nutre Clean XP for five to ten cycles to flush out polymers that have built up on the brushes, in plumbing, and the solvent tank. The rinse cycle should be lowered to one half the amount of solvent previously used. Vacuum distilling may be used to recover the washout for additional processing. Due to the fact that all of Nutre Cleans XP's components share matching boiling points, no add backs or make up is required for the recovered chemistry. Full instructions and assistance will be provided when conversions occur.

Nupro Technologies, Inc.